It depends on the size, the surface, any oil or heavy staining, and whether you want clean-only or clean and seal. Call or text (469) 343-4010 or use the quote form, and we'll put together a clear estimate with no mystery line items.

Will pressure washing stripe or damage my concrete?

Stripes and etched lines usually come from too much pressure held too close, or uneven passes. We set the pressure and method to the concrete, not one setting for everything, and hot water does more of the work. Worn, patched, or older concrete can still show its own shade differences once it is clean. We point those out before we start.

How long after pressure washing can you seal concrete?

We wait about 48 hours of good, dry weather after pressure washing before we seal. The concrete needs to be fully dry so the penetrating sealer can get down into the pores. Rain or cool, damp days can push that back.

How long before you can park after sealing?

Stay off it for 24 hours after sealing, including foot traffic. We'll tell you when it's ready to park on.

Can you get oil stains out before sealing?

Yes. We use an enzyme cleaner and hot water from a boiler, and we don't seal over oil. If an old stain will leave a shadow, we tell you on the quote.

Commercial pressure washing + sealing

Commercial concrete cleaning and sealing in McKinney

We clean the concrete your customers, tenants and crews use every day: storefront entries, office walks, parking lots, parking garages, warehouse floors, dumpster pads, and single-story building exteriors. Hot water from a boiler on a trailer, with pressure and cleaner matched to the surface, plus an optional penetrating silane/siloxane seal.

Call (469) 343-4010 Text us Request a quote

Commercial jobs start at 1,000 sq ft.

Text what you need cleaned and your city, and we'll put together a clear estimate with no mystery line items. We reply within about 1 business day.

Before and after

Entries and walks, before and after

Entry slabs and walkways we've cleaned.

Entry slab with heavy dark staining, before and after cleaning

Entry slab with dark mottling, before and after cleaning

Entry walk with speckled grime, before and after cleaning

Concrete walkway before and after pressure washing by R.E. Clean & Seal

What we do

Pressure washing first. Sealing when it's worth it.

Clean-only is a complete job. We'll tell you straight if a seal is worth adding.

Commercial jobs start at 1,000 sq ft.

What we don't do: roof washing, epoxy or floor coatings, and vehicle washing.

Storefronts and entries Aprons, door landings, walks and customer paths.
Sidewalks and walkways At retail centers, office parks and apartment communities.
Parking lots and parking garages Surface cleaning of drive lanes, stalls and garage decks, quoted by surface.
Oil and drip stains Hot water and an enzyme cleaner pull oil up out of the pores. Fresh drips usually come out. If an old, set-in stain will leave a shadow, we tell you on the quote.
Amenity areas Pool decks, patios and courtyards.
Dumpster pads Hot water and a degreaser lift the grime that builds up around your bins.
Single-story building exteriors Storefronts and single-story commercial buildings, washed from the ground.
Interior concrete floors Hot water and a degreaser lift oil, grease, tire marks and grime off interior concrete floors in warehouses and garages. No epoxy or coatings.
Penetrating silane/siloxane sealing Soaks into the concrete and keeps water out, with no shiny film. It increases concrete lifespan 50–80%, lasts 5–10 years depending on foot traffic, and helps hold off mold and mildew. Two visits: wash, then two coats of sealer once the concrete is dry. Stay off it for 24 hours after sealing, and we'll tell you when it's ready to park on.
Scheduled around your hours We schedule the work so it doesn't get in the way of your customers or tenants.

How it works

Three steps to a clear estimate

Call (469) 343-4010 Text us

Text or call Tell us what you need cleaned and your city.
We walk the concrete with you Before any water goes down, we point out oil, rust, patches and cracks.
You get a line-by-line estimate Clean-only or clean + seal. Clean-only is a complete job.

Free quote

Request a quote

Tell us about the property and the concrete. We reply within about 1 business day.

Prefer to talk? Call or text (469) 343-4010.

Name

Phone

City

Property type

What needs cleaning Approximate size (sq ft) Service Email (optional) Photos (optional, up to 2) Notes

Questions

Common questions

What does it cost?
It depends on the size, the surface, any oil or heavy staining, and whether you want clean-only or clean and seal. Call or text (469) 343-4010 or use the quote form, and we'll put together a clear estimate with no mystery line items.
Will pressure washing stripe or damage my concrete?
Stripes and etched lines usually come from too much pressure held too close, or uneven passes. We set the pressure and method to the concrete, not one setting for everything, and hot water does more of the work. Worn, patched, or older concrete can still show its own shade differences once it is clean. We point those out before we start.
How long after pressure washing can you seal concrete?
We wait about 48 hours of good, dry weather after pressure washing before we seal. The concrete needs to be fully dry so the penetrating sealer can get down into the pores. Rain or cool, damp days can push that back.
How long before you can park after sealing?
Stay off it for 24 hours after sealing, including foot traffic. We'll tell you when it's ready to park on.
Can you get oil stains out before sealing?
Yes. We use an enzyme cleaner and hot water from a boiler, and we don't seal over oil. If an old stain will leave a shadow, we tell you on the quote.

Service area

Based in McKinney. We come to you.

We also serve Allen, Frisco, Plano, Prosper, Celina, Melissa, Fairview, Princeton, Anna, Wylie, Murphy and Parker. There's no walk-in shop.